Pricing

 

 

 
   

 


 

Upgrade to Premium Service!

 

 

This service includes all the bells and whistles when it comes to details. This is true custom work! Every piece goes thru extensive quality control. The film will have minimal distortion and will not be allowed to flow over itself as with the Standard service. Fine line masking is used where precision seams lines will meet. Detailed touch up brush and airbrush are used if needed. Items will be double or triple masked and dipped to achieve the best possible results.  Whether you choose matte, semi gloss, or high gloss, you will receive the very best along each and every process to completion. All premium service items will be priced on a per case basis. Call or email.

 

 Single Item and Volume Pricing Available Terms of Payment

 

Order Form       Scope Waiver              208-288-1008 or Email: sales@hydro-dip.com

 

 Please print and send with your parts. Please disassemble all firearms including: bows, AR's, bolt rifles, shotguns, pistols etc. before shipping.

 

Here's How It Works!

 

------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

 

 

 

Shotguns

Complete Shotguns (Butt stock, forearm, barrel, receiver, end cap and trigger guard) – $175.00
Complete Over & Under Shotgun – $200.00
Stock Only – $70.00
Forearm Only – $55.00
Barrel Only – $85.00
Receiver Only
- $65.00

Rifles

Complete Rifle* (barrel, action, stock) – $180.00
Black Powder Rifle* – $180.00
Rifle Stock Only – $90.00
Target Stock or Thumbhole stock – $150.00
Rifle Barrel/Receiver Only –
$95.00

 

Gun Accessories:

Scope Rings and Base – $40.00
Scopes: We will mask off numbering/lines and lenses.

Scope – Standard (At Owner’s Risk/Not Warranted) – $100.00
Choke Tube – $20.00
Extension Tube – $30.00
Bolt Handle (At Owner’s Risk/Not warranted) –
$25.00

Trigger Guard - $20.00

Floor Plate - $20.00

 

Note: Scopes will have to be fully submerged in water -no warranty will be issued. Scope waiver form required.

These items will not be warranted. Please make sure your gun is fully disassembled before shipping it to us.

 

AR-15 Style Rifles and parts

Most items will be double dipped with over-lapping print on the seam lines. To avoid over-lapping print please ask about our premium service.

Completely disassemble your AR. Send only parts you wish to have dipped. If dipping barrel it can remain attached to upper.

 

Complete AR Style Rifle – $259.00
(Includes: Buttstock, Handguard, Upper/Lower, Grip and one mag.)
AR Furniture Set (Buttstock, handguard, pistol Grip) – $165.00
AR upper only – $45.00
AR lower only – $45.00
AR Upper/lower combo – $90.00
Buttstock – $70.00
Handguard (standard) – $60.00
Grip – $30.00
Charging Handle – $20.00
Barrel only – $60.00
Magazine (20-30 round) – $20.00 add $5 to mask windows.
Rails (4) –
$45.00

 

The coating may make for a snug fit in some areas which may need extra attention when putting
parts back together. We are not responsible for damage caused during reassembly.

 

Pistols

Complete Pistol 150.00
Revolver frame only $100
Top Slide only – $75.00
Frame only – $75.00
Pistol Grips (such as 1911 grips per set of 2) –
$35.00

Paintball or Air Guns and Accessories

Complete Paintball or Air gun (Proto style or similar) with hopper and tank – $200.00
Paintball gun (Proto style or similar) – $170.00
Complete Paintball Gun (Tippman style rifle or similar) with hopper and tank – $250.00
Stock Only – $75.00
Paintball Rifle (Tippman style or similar) – $270.00
Barrel Only – Single – $60.00
Air Tank – $70.00
Stock Only – $70.00
Hopper – $85.00
Face mask –
$85.00

 

All paintball guns must be disassembled prior to shipment.

Bows & Accessories

Complete Bow* (Riser** and Limbs) – $170.00

Riser Only – $90.00
Limbs Only (2 standard or 4 split) – $85.00*
Cams or Wheels – $40.00
Limb Pockets (both) – $30.00

Quiver (top only) – $35.00
Stabilizer – $35.00 up to 6″ or $55.00 7″ and up
Quiver Hood – $30.00
Quiver – Complete (non rubber parts only) – $65.00

 

If your bow or bow parts have a rubberized or soft feel coating, please strip before shipping to Hydro-Dip.
The coating may make for a snug fit (limb pockets, etc) which may need extra attention when putting
parts back together. We are not responsible for damage caused during reassembly.

If your items are not listed please call or email.